Forum Replies Created

  • Lance

    Member
    November 28, 2022 at 8:38 pm

    Rylan rebuilt my 13 XCT at 117k, I had one of the bad cast motors, the pistons where burnt, rings completely shot. Someone tried to file the heads to get a better seal, it didn’t help at all, I believe these 106 motors can go 200k if well maintained…

  • Lance

    Member
    November 15, 2022 at 6:06 pm

    Just found out Witchdoctors can’t modify Big gonzos into muscle mufflers so scratch that, need another option…

  • Lance

    Member
    October 8, 2022 at 7:12 pm

    Would different pipes help the torque?

  • Lance

    Member
    August 8, 2022 at 10:57 pm

    Paid members gain access to our Pro Forums, One-On-One Tech Help, and more. Please sign up for a Monthly, Pro, or Lifetime membership to view this content.

  • Lance

    Member
    August 8, 2022 at 2:35 pm

    Paid members gain access to our Pro Forums, One-On-One Tech Help, and more. Please sign up for a Monthly, Pro, or Lifetime membership to view this content.

  • Lance

    Member
    August 8, 2022 at 6:18 am

    Si the divorce was finalized today, she took the house the car and my savings, but the bitch can’t have my bike!!

    All I need it this bike N that tarp and this rope…..

  • Lance

    Member
    August 7, 2022 at 7:58 pm

    Paid members gain access to our Pro Forums, One-On-One Tech Help, and more. Please sign up for a Monthly, Pro, or Lifetime membership to view this content.

  • Lance

    Member
    August 4, 2022 at 9:40 am

    Check if the coils are firing at the spark plug wires, Can you hear the fuel pump prime when you turn on ignition? What voltage do you ya have at the battery before you hit the start button and during? Check all fuses also, if that turn signal relay is burned up the bike will not start. Good luck!!

  • Lance

    Member
    August 4, 2022 at 9:35 am

    Start with the simple, check for spark at the spark plugs, insure the coils are firing. Check all fuses, can you hear the fuel pump prime when ya turn the ignition on? What’s the voltage before you hit the start button and during? Have you replaced the 40A circuit breaker? Good luck