Home › Forums › Performance Topics › Turn your 2005-2007 100" into a 106" stroker with this one easy step!
-
Turn your 2005-2007 100" into a 106" stroker with this one easy step!
Posted by Rylan on December 12, 2023 at 6:54 amAll you need to turn your 2005-2007 100″ into a 106″ engine is a 2008+ crankshaft, drive gear, connecting rods, and torque compensator gear (as pictured). Then a good set of exhaust, intake, cams, and professional tune and you could see results like the dyno pictured! I can rent you the tools you’ll need to split the cases and install the crank! 😜
Rylan replied 1 month, 3 weeks ago 5 Members · 10 Replies -
10 Replies
-
So the rods from the ’07 will work or do you need to use the newer ones
-
You want the 106″ rods. I’ll edit the original post to reflect this.
-
Thanks sir, I have an extra 100 that I ordered parts for and will give this a try.
-
-
-
This will also work on 2008 through 2010 100 inch engines. You won’t need the torque compensator gear or the crankshaft gear in that case – all you’d need is the crankshaft itself!
-
🤯
Anyone is proximity to the Philadelphia area able to do this? I’m very interested in this, perhaps before I do the cams, intake and tune
-
Is this possible on a 2003 engine? I just finished up a Victory big bore install (100″). Power is greatly improved with a generic power commander map (still need to get in for a proper tune). On the quest for more on a budget and this seems to be the next logical step.
-
No, unfortunately it won’t. The 106 crank won’t work in the 92/5 due to it having a different crank gear and cam chain sprocket.
-
Thanks for the reply. I do have a spare 2006-07 engine with a busted front head. If I can find a reasonably priced head, maybe the crank swap is in the cards. That is a reasonably easy swap into a 2003 frame, right?
-
This reply was modified 1 month, 3 weeks ago by
Aaron.
-
This reply was modified 1 month, 3 weeks ago by
-
-