-
2011 Victory CC cruise issue
Cruise will unset itself about 30 minutes into the ride and not reset for the rest of the ride. I stop and perform the self diagnostic test and all switches perform as they should. The tach and speedo work as they should. I have replaced the cruise controller with no better results. I am at a loss as to where to go from here. Could the ECM have anything to do with the cruise? Could the speed sensor signal strength get weak after getting hot and not be strong enough for the cruise? Any Ideas would be appreciated.
-
1 Reply
-
I have not seen this before. I’d look at the simple things like the brake and clutch levers, the brake pedal, the throttle cable safety switch, and all the associated wiring to and from those points that will turn off the cruise.