-
Spent a bunch more time in the manual. Sorry for being lazy 😂 inlay isn’t really an option.
I tested for voltage to Pin 1 on the auto canceling module. It’s constantly at 5.22v even with the speed sensor and sim unplugged. Manuel says between .6v and 5v when it’s spinning, but doesn’t say what to do if it’s out of spec like this…
But right now I have 5.22v at the canceller. I tried pulling the relay and that didn’t change anything. The really weird part about this is that it was 9.22 before I started messing around with things today…
Any thoughts on where I should go next? I’m digging through the manual and will update if I find another step.