Community Forums

Find answers, ask questions, and connect with Victory enthusiasts around the world.

Home Forums The Parking Lot Supercharged engine top end

  • Supercharged engine top end

    Posted by Rylan on July 29, 2022 at 4:22 pm

    From Facebook, October 2015

    We found a little time over the last week to install the top end in our Supercharged Sport Cruiser.

    The block is a 2008-2010 series.

    Compression is 9.35 with forged Lloydz pistons, and we’re using .495 S&S cams.


    • This discussion was modified 1 year, 8 months ago by  Rylan.
    Rylan replied 1 year, 8 months ago 1 Member · 7 Replies
  • 7 Replies
  • Rylan

    Administrator
    July 29, 2022 at 4:24 pm

    Just a little bit of work on the chambers, runners, and bowls of the stock heads.

  • Rylan

    Administrator
    July 29, 2022 at 4:25 pm

    The bigass clutch! Lloydz variable with a Barnett spring.

  • Rylan

    Administrator
    July 29, 2022 at 4:25 pm

    Weighing piston pins for curiosity’s sake.

  • Rylan

    Administrator
    July 29, 2022 at 4:26 pm

    L to R: Steel original, steel lightened, titanium. We went with the titanium of course! : )

  • Rylan

    Administrator
    July 29, 2022 at 4:27 pm

    Mock-up.

  • Rylan

    Administrator
    July 29, 2022 at 4:27 pm

    Getting ready to bolt on some accessories.

  • Rylan

    Administrator
    July 29, 2022 at 4:43 pm

    😀

    • This reply was modified 1 year, 8 months ago by  Rylan.