Community Forums

Find answers, ask questions, and connect with Victory enthusiasts around the world.

Home Forums The Parking Lot My suggested tool kit

  • My suggested tool kit

    Posted by Rylan on July 30, 2022 at 5:02 am

    If you’ve ever wondered what tools would make a good kit for your Victory, the rapid response tool rail I keep in my dyno room is a good guide. These are the most common tools I reach for when I’m working on a Vic. Some are certainly dyno specific (like the 02 sensor chase) but the others can tackle many common tasks. I usually throw this rail (and the stuff in the background) in my saddlebag when I leave for a long trip. I know these tools would cover anything fixable along the way.
    From L to R: 5/8 spark plug socket, 10mm socket, long ball 5mm, socket extension, ball 8mm, ball 10mm (dyno specific), 4-5-6-8-10mm straight allens and my 02 chase (again, dyno specific). Combined with a ratchet, some zip ties, a sturdy pliers, and some duct tape would round out the essentials for a Victory saddlebag tool kit.

    B replied 1 year, 10 months ago 4 Members · 3 Replies
  • 3 Replies
  • Tony

    Member
    August 10, 2022 at 2:51 am

    This is great , I am putting one together now … a lot less then the adventure bike.. thanks

  • Jim

    Member
    August 10, 2022 at 8:03 am

    Thanks for the suggestions!

  • B

    Member
    August 10, 2022 at 5:13 pm

    I was able to pick up a couple extra Victory tool rolls like the one that came with my ’99 & carry one in my Vision. So far it’s taken care of the few minor issues I’ve had on the road & has helped out others that I assisted on the roadside.

    • This reply was modified 1 year, 10 months ago by  B.